Excavator Attachments for Hire
Post Drivers
Excavator Attachments for Hire
Post Drivers
Available for hire is the post driver which suits a 5.5T excavator / digger.
The post driver is fitted with an excavator bracket which suits 5 tonne excavators.
It has a 280kg block and a 4m mast.
They are great for driving in posts for stock yards, fence posts and more...
You can use the digger and bucket to clear and prepare the site then attach the post driver and drive in the posts.
Or it can be fitted with a 3 point linkage so you can mount it behind your tractor.
Side mount bracket available for orchard and vineyard applications.
The Post Driver is available to hire from either the Allways Hire branch in Hastings or Napier. Enquire today.
Specifications
HYDRAULIC OIL FLOW REQUIRED
N/A
HYDRAULIC PLUMBING REQUIRED
Connect the hydraulic couplings to the digger
Delivery & Instructions
TRANSPORT REQUIRED
Trailer or Truck
Safety Equipment Required
Compare our hire ready equipment
HYDRAULIC OIL FLOW REQUIRED
HYDRAULIC PLUMBING REQUIRED
5.5T Excavators / Diggers
Connect the hydraulic couplings to the digger
10T, 12T, 13T, 13.5T Excavators / Diggers
100 – 120 LITRES PER MINUTE
Directly join the hoses, can be used with couplings. 12V plug required.
1.7T - 10T Excavators / Diggers
Single Hydraulic Lever - 1 Pair of Hydraulic Outlets
5.5T and 10T Excavators / Diggers
TWO HYDRAULIC HOSES WITH 1/2 INCH HYDRAULIC COUPLINGS ARE REQUIRED. MUST BE FITTED TO EXCAVATOR WITH FRONT GUARDING.
230mm-600mm wide trench buckets
5T, 10T, 12T, 13T, 13.5T Excavators / Diggers
100 – 120 LITRES PER MINUTE
DIRECTLY JOIN THE HOSES, NOT TO BE USED WITH COUPLINGS
1.7T EXCAVATORS, 5.5T EXCAVATORS
CONNECT THE HYDRAULIC COUPLINGS TO THE DIGGER
CONNECT THE HYDRAULIC COUPLINGS TO THE DIGGER
TRUCK OR TRAILER, OR BACK OF UTE
CONNECT THE 1/2 inch HYDRAULIC COUPLINGS TO THE DIGGER
CONNECT THE 1/2 inch HYDRAULIC COUPLINGS TO THE DIGGER
Need Help? Give us a call!
06 872 6774
Find A Branch
Call us on
